Outdoor lighting-high quality engineering lamps [wall washing lamp]]
Author:
Source:
Release time:2024-10-22
How to quickly, accurately and quickly choose LED wall washer for lighting engineering?
Wall washing lamp is a common lamp to do quantification, mainly to light the wall surface of the building, which belongs to the surface light source.
For the lighting project how to choose the right LED wall washer, there are the following 4 aspects of the proposal.
1, choose a regular wall washing lamp manufacturer
Formal and powerful manufacturers are more trustworthy in terms of quality or construction technology support.
Therefore, if you really don't know how to choose, choosing a regular lamp manufacturer is a choice that will not go wrong.
2, according to the height of the irradiation to choose the appropriate wattage LED wall washer
The power and luminous angle of the lamp also affect the illumination height of the wall washer.
The greater the power of the wall washer, the brighter the illumination height will be higher.
In the case of the same power, the smaller the beam angle, the higher the height of the irradiation.
We usually use a 30-degree wall washing lamp to emit light, 18W when lighting 1-3 meters, 24W when lighting 3-4 meters, and 36W when lighting 4-5 meters.
Of course, these are not standard, specific analysis of the specific situation, you can let the lamp manufacturers to give you a suitable lighting scheme of lamps.
3. Choose the color of LED wall washer according to the design effect diagram
Wall washing lights are commonly used in monochrome and DMX512 external control
As the name implies, the color of the monochrome wall washing lamp has not changed, and it has always been a color.
The color of DMX512 wall washer can be changed, and various effects can be achieved by editing.
4, according to the degree of light absorption of the wall to choose LED wall washer power
The color and smoothness of the wall also have a certain influence on the power of the wall washer.
Some walls are relatively deep or uneven walls are relatively light-absorbing.
If the same is 2 meters of light, in the case of appeal, we choose to wash the wall lamp power is greater than the general power.
Therefore, it is necessary to conduct debugging on site to select suitable wall washing lamps.
The role of led wall washerledhow to use the wall wash lamp?
LED wall washer, as the name suggests, let the light wash the wall like water, led wall washer
What is the role of it? Mainly used for wall decoration and lighting purposes, perhaps a lot of people are not very clear,
In addition, there are other aspects of the role, followed by led wall washer how to use?
the role of led wall wash light:
1. It is mainly used for architectural decoration and lighting, as well as for outlining large buildings.
Its technical parameters are roughly similar to those of LED floodlights, compared to other shapes of LEDs.
The heat dissipation device of the strip structure of the projection lamp and the LED wall washer lamp is more easy to handle.
2, because LED has the characteristics of energy saving, high light efficiency, rich colors, long life, etc.
At present, other light sources of wall washing lights are gradually replaced by LED wall washing lights, such as corporate buildings.
The lighting of walls, the lighting of government buildings, the lighting of walls of historical buildings, and places of entertainment, etc,
From the original indoor to outdoor, from the original part of the lighting to today's overall lighting, are the level of progress and development;
3. Today, LED wall washer lights have been heavily invested in lighting projects,
In the future, LED wall washer lights will become an indispensable part of the lighting project.
how to use led wall washer?
1. Preparation
(1) Before installing the LED wall washer, the tin strip and soldering iron required by the LED lamp beads must be installed,
Soldered on the aluminum substrate, ready for installation.
(2) Check the installed materials first. If there is any problem, you can negotiate a refund or exchange,
Finally prepare the installation kit.
2. Check
In order to ensure the quality of the installation, check the welded board again, power test is available
Normal light, to avoid the welding after the occurrence of not bright, need to be removed again and connected again.
3. If the lamp can be normally bright, first coat the back of the aluminum substrate with heat dissipation silica gel,
Then put the board into the shell.
4. Welding
(1) Solder the power cord to the positive and negative poles of the aluminum substrate, tie the two ends with tape, and
The implementation of glue must be fixed firmly.
(2) In the process of filling glue, the overall uniform flat, do not tilt or tilt, will affect
The effect of the installation.
5. If glue is used, remove the remaining explanation in the afternoon of the same day, and then remove the glass
Glass, and then plug the two ends of the wall washer.
6. Wiring the installed wall washing lamp, pay attention to the outgoing interface, and do not connect incorrectly,
It is better to connect them one by one, insert the male and female, and install them according to the reference instructions.
7. When making the finished lamp, first power on, then turn on the switch to test, check whether it is normally lit,
If abnormal, retest the adjustment.
Zhongshan Quanhui Outdoor Lighting Co., Ltd.Founded in 2004, it is a comprehensive lighting enterprise integrating production, sales and installation,
20 years focused on production:Municipal street lamp,landscape lamp,Garden lights,high pole lamp,Smart street lampSuch as outdoor landscape lighting lighting project.
Related News
Guangdong Quanhui Lighting Co., Ltd
Phone : 86-13726017260 Mr Li
WhatsApp：+86-18028366908
E-Mail: 18028366908.qh@gmail.com
Website : www.quanhuilight.com
Address of exhibition hall : cards 28, 29 and 30, building c, international street lamp city, guzhen town, Zhongshan city, Guangdong province
Factory address : No.17 and 18 Jiwei Avenue, Haizhou Xianlong Luo Sha Jiwei Industrial Zone, Guzhen Town, Zhongshan City, Guangdong Province
Leave us a message.